Why Titanium Watch Bands: Grade 1 Titanium, DLC Coating and What to Check Before You Order
Why choose a titanium watch band? Grade 1 titanium with DLC coating HV600–HV1000, and what to check before you order. Sampling in 15 to 20 days for your order.

Why Buyers Ask Me About Titanium First
When buyers ask me why they should choose titanium, I start with the same three questions. What grade is the titanium? What is on the surface? And what test result backs up the claim? If a supplier cannot answer those three with numbers, slow down, because the word titanium on its own tells you very little.
I write this guide for wholesale buyers, distributors and brand owners choosing a titanium band for their next order. It covers Grade 1 titanium, DLC coating, comparing titanium with stainless steel, care, and what to check before you order. Every number here is one we can show you the source for.
What Grade 1 (TA1) Titanium Actually Means
Titanium comes in grades, and the grade is the first thing to confirm. Our bands are Grade 1 (TA1) titanium only. We do not sell bands in Grade 2, Grade 5 or TC4, and we do not describe our bands with those grades. If you see those grades in a search result, treat them as search terms buyers use, not as a description of our product.
Grade 1 is the commercially pure grade with the lowest levels of impurity elements, and the chemistry is something a laboratory can measure and a buyer can verify. We hold a composition report from SGS, report number GZHL2402006343JW, dated 2024-02-29, for one titanium link sample. It tested the chemistry of the sample and concluded that it conforms to GB/T 3620.1-2016 grade TA1. Here is what it measured.
| Element | Result | Limit | Method |
|---|---|---|---|
| Iron (Fe) | 0.07% | 0.25% or less | ASTM E2371-13 |
| Oxygen (O) | 0.05% | 0.20% or less | ASTM E1409-13 |
| Nitrogen (N) | 0.002% | 0.030% or less | Not stated in the report |
| Carbon (C) | 0.004% | 0.10% or less | ASTM E1941-10 |
| Hydrogen (H) | 0.0010% | 0.015% or less | ASTM E1447-2022 |
Two points need to be said plainly. First, the hydrogen test was carried out by a laboratory other than SGS. Second, this report covers chemistry only. It contains no salt-spray result, so do not read it as proof of corrosion resistance. The corrosion result comes from a separate test, described below.
Ask for the grade in writing, and ask for the chemistry report behind it. "Titanium" without a grade is not a specification.
DLC Coating and the HV600–HV1000 Figure
The surface of the band matters as much as the metal underneath it. Our bands use a DLC coating, and we state its hardness as a Vickers figure: HV600–HV1000. That number is the point of the coating. A coating with no hardness figure is only a colour name, and a colour name tells you nothing about how the surface will hold up.
DLC stands for diamond-like carbon. It is a hard coating applied to the surface of the band, and on our bands it is the layer that takes the daily contact: desks, door frames, gym equipment and everything else a wrist meets during the day. The hardness figure HV600–HV1000 is the range we work to for that coating.
When you compare coatings, ask for the same kind of number from every supplier. A coating described only as "black" or "gold" gives you nothing to compare. If a supplier cannot state a hardness figure, treat the coating as unconfirmed, whatever the colour looks like in the photo.
One more check belongs here. The clasp, the connector and the pins see the same daily wear. When we test a band, we test the assembled band with its connectors fitted, not a single link on its own. Ask whether the test was done on the assembled band or on a loose part.
Titanium vs Stainless Steel: A Straight Comparison
Buyers often ask me to compare titanium with stainless steel directly. A fair comparison needs the same evidence on both sides. The table below shows the questions to ask and what we can say about our own bands.
| Question to ask | Our Grade 1 titanium band | What to ask any supplier |
|---|---|---|
| What grade is the metal? | Grade 1 (TA1) titanium, confirmed by SGS composition report GZHL2402006343JW | Ask for the grade and the report in writing |
| What is the coating hardness? | DLC coating, HV600–HV1000 | Ask for a hardness figure, not a colour name |
| Has it passed a salt-spray test? | Yes, 48 hours to ASTM B117, no visible corrosion on the assembled band and connectors, in our own testing | Ask for the test duration, the standard and whether the band was tested assembled |
| Has it passed a pull test? | Our internal target is 120 N held for 5 seconds, with a pass meaning no loosening, deformation or breakage | Ask for the force, the hold time and what counts as a pass |
Grades, hardness figures, test durations and standards are the comparison. Adjectives instead of numbers are not a comparison at all.
Comfort and Care
A band that is hard to wear will not sell twice. Comfort comes from the fit on the wrist and on the watch, and from a clasp that opens and locks cleanly. When your sample arrives, wear it for a full day before you approve it. Check that the links sit flat, that the band does not pinch or catch, and that the clasp still works normally after repeated use. A sample checked only in the hand tells you far less than a sample worn for a day.
Care is straightforward. Rinse the band with clean water after exposure to sweat or salt water, dry it with a soft cloth, and keep it away from harsh chemicals. Do not use abrasive cleaners on the coating, because the coating carries the hardness figure. Store the band dry when it is not being worn.

What to Check Before You Order
Use this checklist before you place a bulk order. Every answer should come back in writing.
| Check | What good looks like |
|---|---|
| Grade in writing | Grade 1 (TA1) titanium stated in the quotation, not only the word titanium |
| Chemistry evidence | A dated composition report, such as our SGS report GZHL2402006343JW, showing the grade |
| Coating figure | A DLC hardness figure, such as HV600–HV1000, not only a colour name |
| Corrosion result | A salt-spray result with duration and standard, such as 48 hours to ASTM B117 on the assembled band |
| Strength result | A pull-test figure with force and hold time, such as 120 N held for 5 seconds |
| Fit and interface | The watch families the band is made for, confirmed against the real watch |
| Sample first | One sample ordered and worn for a full day before the bulk order is approved |
The sample is the most important item on this list. A sample generally costs $50–70 and generally takes 15–20 days with us, a small cost against a bulk order made on a guess. Check it on the actual watch: fit, clasp, colour in normal light and comfort over a full day.
Ordering Wholesale: Custom Work, Sampling and Lead Times
Our titanium bands are made for wholesale buyers, distributors and brand owners. Standard custom work, such as a logo on an existing design, can be done from 1 piece. A fully new band shape is different: it needs a brand new mould, and that needs a 1,000 piece minimum order. Tell us the design, the quantity and the watch it is made for in your first message, and we confirm what is standard custom work and what needs a new mould before you commit.
Sampling generally costs $50–70 and generally takes 15–20 days. Ordinary bulk orders generally take 10–20 days after the sample is approved. A fully new mould order generally takes 25–40 days, depending on how smoothly the mould is made. We confirm the exact time for your order before you pay.
The bands are made in our own factory in Dongguan: 108 people, 10 production lines, about 350,000 straps a month, with RoHS, REACH, EN71, CE and ISO 9001 certification. We sign NDAs with customers as a matter of course, so a design you send us stays yours. Factory visits are welcome with 1 day's notice.
Payment can be made by TT or wire transfer, PayPal, Western Union, cryptocurrency, credit card or cash, plus Alipay and WeChat Pay.
Frequently Asked Questions About Titanium Watch Bands
Q: Is Grade 1 titanium the right grade for a watch band?
A: Grade 1 (TA1) is the grade our bands are made in, confirmed by our SGS composition report. What matters is that the grade is stated in writing and backed by a dated report, not that a listing uses the word titanium on its own.
Q: What does a DLC coating of HV600–HV1000 mean?
A: It means the coating hardness is stated as a Vickers figure in the range HV600–HV1000. DLC is a hard diamond-like carbon coating on the band surface. A colour name alone tells you nothing about how the surface will hold up.
Q: Does passing 48 hours of salt spray mean the band will never corrode?
A: No. In our own testing, assembled bands and connectors passed 48 hours of salt spray to ASTM B117 with no visible corrosion. That is a result for a stated duration and standard, not a promise that no corrosion can ever happen.
Q: Will a 22 mm titanium band fit my watch?
A: A 22 mm band fits watches with a standard 22 mm lug width, and 22 mm bands are used across many traditional watches, Samsung watches, Garmin watches and Huawei watches. That is a lug width, not a promise for one specific model. Confirm the interface against the real watch, and order a sample to check the fit first.
Q: How do I order a sample, and what does it cost?
A: Send us the design, the quantity and the watch the band is made for. A standard sample generally costs $50–70 and takes 15–20 days, and a sample with your logo on an existing design can be made from 1 piece. A fully new band shape needs a new mould and a 1,000 piece minimum order.
Q: What is the minimum order for a custom titanium band?
A: Standard custom work on an existing design can be done from 1 piece. A fully new mould design needs 1,000 pieces. Tell us what you want customised and we confirm which of the two applies to your order before you pay.
One Last Thought Before You Order
A titanium band is a good choice when the numbers behind it are clear. Grade 1 (TA1) with a dated chemistry report, a DLC coating with a stated hardness figure, a salt-spray result with a duration and a standard, and a pull-test figure with a force and a hold time. Those four numbers are the whole buying decision.
Send us the design, the quantity and the watch your band is made for, and tell us what you want checked on the sample. We will confirm the grade, the coating, the sampling fee and time, and the bulk lead time in writing before the bulk order starts.
Get a quote for your titanium watch band order today. Contact Oyasha at WinWin Watch Band Factory (Win-Win S&T (Shenzhen) Co., Ltd.) on WhatsApp +86 134 2288 6491 or by email at oyasha@customsmartjewelry.com, and tell us the design, the quantity and the watch you need.